I Needed a Hardwood Supplier Near Me—Here’s What I Learned (and What to Avoid)

on September 15, 2025

I Needed a Hardwood Supplier Near Me—Here’s What I Learned (and What to Avoid)

 

 

We’ve all been there. Or at least I know I have... I went down every rabbit hole to the deepest corners of the city looking for every possible hardwood supplier near me. I’ve found out firsthand how overwhelming the options can be… Especially when you're looking for both quality and reliability.

Should I take that wicked deal on Facebook Marketplace from that farmer who sells air-dried stuff on ‘sticks’? He promises it’s been “air dried for over 10 years” …  Or should I pay 3 times that amount from the guy with an attitude problem who set up shop down the street? The options are endless, and there seems to be no right answer.

 

Reliable Hardwood Matters

If you know the struggle I’m referring to, you might need to learn what I did when I went looking for hardwood suppliers near me. It also means you’re on the brink of a new build… maybe a furniture piece, a renovation, or a creative weekend project!

Choosing where and how to buy your hardwood can be just as important as the design itself. From understanding lumber grading, knowing what species to use, and colour schemes, to knowing the farmers’ wood will twist faster than a hardwood cutting board in a dishwasher… There’s more to buying hardwood than just grabbing what’s in stock and cheap.

This guide covers essential hardwood buying strategies so you can source the right material for your needs—whether you're a beginner woodworker, experienced contractor, or simply trying to avoid costly mistakes.


Make a Clear Plan

What are you building?

Every successful woodworking project starts with a clear plan. At the heart of that plan is choosing a reliable, high-quality hardwood. The wrong material can derail even the best designs, leading to movement, warping, or poor finish results. That’s why it’s critical to match your wood to the project’s demands from the start.

How does the wood need to perform?

  • Furniture or cabinetry? Choose stable hardwoods that take a finish well—like Maple, Walnut, or Cherry.
  • Outdoor pieces? Go for rot-resistant species such as White Oak, Cedar, or Teak that can handle the elements.
  • Turning or carving projects? Denser woods like Hard Maple or exotic options like Wenge hold detail beautifully and turn cleanly.

By identifying your project’s purpose and selecting wood that’s both structurally and visually suitable, you set yourself up for smoother work, better results, and fewer surprises along the way.




Understand the impact of Kiln-Dried vs. Air-Dried Lumber

One of the most important factors in buying hardwoods is moisture content. Wood continues to move and shift as it dries, and improperly dried lumber can warp or split over time.

  • Kiln-dried lumber is heated to remove moisture quickly and consistently. It’s ideal for indoor furniture, cabinetry, and glue-ups.
  • Air-dried lumber is often used as an affordable alternative when precision isn’t required, or when lumber stability isn’t critical. Some outdoor projects include wood where some movement is acceptable.

When purchasing lumber, one of the first things to take note of is if they are still stickered (on lumber drying sticks). Although some people will take air dried lumber off the stickers, many leave them on. This is a quick way to tell they are likely only air dried or waiting to go into the kiln. That’s just a quick tip though. The only true way to make sure something is kiln dried is to test it with a moisture meter.

For most woodworking projects—especially those involving joinery or fine finishes—kiln-dried hardwood is the safest choice.

Air Dried Live Edge Slabs

 

Kiln dried lift of Walnut

 


Domestic vs. Exotic Hardwoods: What's the Difference?

When choosing a species, you’ll come across both domestic and exotic hardwoods. Each category has strengths depending on your project's goals.

Domestic Hardwoods

These species are typically sourced from North America and include:

  • Black Walnut: Rich in tone and easy to work with. (Furniture, cabinetry, gunstocks, and carving
  • Red Oak: Strong, affordable, and easy to work. (Flooring, furniture, and cabinetry)

  • White Oak: Great for structural and aesthetic applications. (Furniture, flooring, barrels, and outdoor projects thanks to its rot resistance)
  • Ambrosia Maple: Striking and unique, with wormy streaks of gray and brown. (Furniture, accents, and turning projects)

  • Cherry: Lightweight, stable, and beautiful when finished. (Fine furniture, cabinetry, musical instruments, and decorative accents)

  • Ash: Affordable and very durable. flexible compared to ash. (Tables, baseball bats) 

  • Hickory: Affordable, heavy, and very durable. (Tool handles, flooring)

They’re generally easier to source and more affordable.

Exotic Hardwoods

These species come from regions like South America, Africa, and Asia:

  • Padauk: Bold reddish-orange color that deepens with age. (Furniture, instruments, and decorative accents)

  • Sapele: Stable and versatile with ribbon-like grain. (Cabinetry, paneling, and musical instruments)

  • Yellowheart: Bright golden color that resists fading. (Inlays, accents, and turned projects)

  • Canarywood: Vibrant with streaks of yellow, orange, and red. (Furniture, cabinetry, and fine woodworking)

  • Zebrawood: Dramatic striped appearance. (Furniture, veneers, guitars, and high-end accents)

  • Wenge: Dark, dense, and extremely durable. (Flooring, furniture, luxury woodworking, and tool handles)

  • Bloodwood: Striking deep red tone with natural luster. (Fine furniture, turning, and inlay work)

  • Purpleheart: Naturally vivid purple color. (Furniture, flooring, and decorative accents)

Many exotics are favored for high-end furniture or decorative inlays. They’re often more dense and more challenging to work with. Be prepared for extra tool wear, slower machining, and possibly special adhesives or finishes.

 

How to Calculate How Much Hardwood You Need

One of the most common mistakes is underestimating board footage. This can delay projects or lead to mismatched material later.

What is a Board Foot?

A board foot is a unit of volume, not length. It measures a piece of wood that’s 12" x 12" x 1". To calculate board feet:

(Length [feet] x Width [inches] × Thickness [inches]) ÷ 12

Always order at least 10-20% extra to account for defects, waste from cuts, and matching grain. For complex projects or builds with visible glue joints, 25% extra isn’t unreasonable.

Use our board foot calculator to help


Choosing the Right Lumber Dimensions

Lumber is typically sold in rough, S2S, or S4S formats:

  • Rough sawn: As-milled and unplaned. Cheaper, but requires surfacing tools.
  • S2S (surfaced two sides): Planed on top and bottom. A good balance between raw and ready.
  • S4S (surfaced four sides): Jointed and planed, ready to use, and great for DIYers or small shops saving time, or saving having to buy larger tools.

If you don’t own a jointer or planer, paying a little more for S4S or S3S lumber can save you hours of prep time and improve accuracy.


Know the Source: Big Box Stores vs. Local & Specialty Suppliers

When you look up “hardwood supplier near me”, you’ll likely come across both big box stores and independent or specialty lumberyards. Here’s how they compare:

Big Box Stores

  • Pros: Easy access, standardized sizing.
  • Cons: Limited species, inconsistent quality, higher pricing

Specialty Hardwood Suppliers

  • Pros: Larger species variety, better drying practices, more knowledgeable staff.
  • Cons: May require custom orders or have a learning curve for first timers.

When buying large volumes or exotic woods, it’s worth building a relationship with a knowledgeable staff at a dedicated supplier who can guide you based on your project needs.


Hardwood Grades and How They Affect Your Build (and Your Budget)


When it comes to hardwood, grade matters—not just for looks, but for your wallet and your results. The grade tells you how much clear, defect-free wood you’re getting.

Upper Grades

• FAS (Firsts and Seconds): Long, clean boards—best for furniture or cabinetry.
• Select: Slightly shorter or with minor imperfections—great for visible but smaller parts.

Lower Grades


• No. 1 Common: More knots and variation—ideal for rustic builds or budget-friendly projects. This is often called cabinet grade lumber as it is a good balance between affordability, and the sizes required for cabinet making.
• No. 2 Common: Large presence knots and variation—ideal for rustic builds or budget-friendly projects. This is often referred to as flooring grade, as flooring companies can mass produce usable products even though 50% or less is clear enough to be considered usable.

 

Hardwood Lumber Grade Chart (NHLA Rules)


For a more in-depth breakdown of lumber grades, check out our blog here

 

Higher-grade lumber costs more, but you’ll waste less. Lower-grade boards are cheaper up front but may require more cutting and result in lower yield. Choose a grade that fits your project and workflow. Sometimes spending a bit more saves you both time and hassle.

 

Spotting Quality Wood: What to Look For

When buying lumber, not only is the grade important but you must also inspect for:

  • Twist or bow: Check that the board lies flat.
  • Checking or splits: End-grain cracks reduce usable length.
  • Knots or defects: Some are fine for rustic builds; others can weaken the board.
  • Grain orientation: Quartersawn vs. flatsawn affects stability and appearance.

For furniture, stability is key. If you’re gluing boards edge to edge, avoid excessive cupping or tension. And always allow your lumber to acclimate to your shop for a few days before working with it. 

 

 


Planning Your Lumber Budget

Hardwood pricing is affected by:

  • Species (exotics cost more)
  • Grade and surfacing
  • Thickness and length
  • Moisture content

Plan your project carefully and compare your total costs—not just board footage pricing. For example, a cheaper board with a lot of defects may yield less usable material than a higher-priced, clear board. I can also personally tell you that a gorgeous project that twists and warps after finishing is an expensive lesson in the necessity of kiln drying.

If you’re on a budget, consider mixing domestic species with exotic accents—like using Walnut drawer fronts on a Maple carcass.


Shipping and Delivery Considerations

Not every project can wait on a long delivery window—and not all hardwood suppliers ship beyond local zones. If you’re not near a major city, confirm:

  • Nationwide delivery options
  • Shipping fees and timelines
  • Packaging methods
  • Return or replacement policies

Buying online? Choose suppliers with clear descriptions, photos of actual inventory, and responsive customer service. It’s also smart to check reviews from woodworkers in your area.

🪵 Explore Our Full Hardwood Selection


Bonus Tips for Smart Hardwood Buying

  • Ask about bundle pricing: Many suppliers offer better rates for buying in volume.
  • Buy longer boards when possible: They’re more versatile and often a better value.
  • Label your cutoffs: Exotic scrap is valuable for inlays and accents.
  • Keep a material log: Track what species work well for different tools and finishes.

Final Thoughts

Finding a hardwood supplier near me is just the start. Knowing how to buy—what to look for, how to calculate volume, and when to choose kiln-dried over air-dried—can make all the difference in your finished piece.

Whether you’re tackling a live edge coffee table or prepping lumber for fine cabinetry, sourcing the right material sets the tone for everything that follows.

Take the time to learn about your options, ask questions, and think ahead. Your project (and your wallet) will thank you.

 

Ready to Build Something Great?

If you're tired of searching for a “hardwood supplier near me” and coming up short, give The Knotty Lumber Co. a try. With better selection, unbeatable service, and fast shipping across Canada, we’re here to support every cut, joint, and finish you make.

If you have any more questions, Get in Touch Today

Or start shopping and Get Your Premium Hardwood Now

 

 

🪵 Meta Title (max 60 characters):
Hardwood Supplier Near Me | How to Choose the Right Lumber

📏 Meta Description (max 155 characters):
Learn how to choose the right hardwood for your project. Compare species, drying methods, suppliers & buying tips with this expert guide.

 

BACK TO TOP
Win a $500 Lumber Pack
reviews
See all reviews