Only Progress Bar is visible in preview. Actual discounts dont work on Preview mode. It is only to understand how Progress bar will display on your site
ICE-THIN Flood Coat Crystal Epoxy 1 gallons is 2 x 64 oz KIT // ICE THIN is a two-component epoxy casting system. UV resistant, it has anti-yellowing properties, strong adhesion, good...
Board feet, linear feet, square feet—it’s easy to get lost in the lumber lingo. This guide breaks down the key differences between board feet (a me...
John Wassell
Common Questions and Facts on Finishing Products
Dimensional lumber refers to lumber that is cut and sold in standardized sizes, such as 2x4s, 2x6s, etc. It's commonly used in construction and woodworking projects for framing, building, and other structural applications. The dimensions are usually nominal, meaning the actual size is slightly smaller due to planing and smoothing.
The sizes refer to the thickness:
4/4 (four-quarter) is approximately 1 inch (2.54 cm) thick
8/4 (eight-quarter) is approximately 2 inches (5.08 cm) thick
The "quarter" system is a traditional way to measure lumber thickness, where 1/4 represents 1/4 inch of thickness.
